{"title":"Measurement Tools","description":"","products":[{"product_id":"carvera-cnc-3d-touch-probe-dual-shank-84784","title":"Carvera CNC 3D Touch Probe","description":"\u003cp\u003e3D Touch Probe for the Makera Carvera Air and Makera Carvera. This probe can measures in all 3 axis (X\/Y\/Z) while the stock probe can only measure in Z. This enables accurate location of stock, finding of complicated geometry such as bores, and facilitates improving the calibration of the machine itself.\u003cbr\u003e\u003cbr\u003eOn this probe half of the shank has been turned down to 1\/8\", so this probe can be used with both the standard 1\/8\" collet as well as 6mm collets.\u003c\/p\u003e\n\u003cp\u003eIt comes with the required cabling shortened to the appropriate length for your machine (Air or Original Carvera), terminated with the required probe connector, and supported with a connector housing to make removal easy.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with a spare probe stylus, and has had the modified tail-shaft calibrated within 0.05mm, and the effective tip diameter measured for the specific probe that will be sent to you.\u003c\/p\u003e\n\u003cp\u003eThis kit required the use of the Community Firmware and Controller, more details about these projects can be found at https:\/\/carvera-community.gitbook.io\/\u003c\/p\u003e\n\u003cp\u003eIf using the Original Carvera, the cabling requires the probe port that came with the electronics extension board with Harmonic Drive 4th Axis. Carvera machines purchased from 2025 on wards (with the serial number ending with -R) have this port available. This is because the probe port on this extension board is required. The probe can be used at the same time as the 4th axis.\u003c\/p\u003e\n\u003cp\u003eIf you have any doubts, feel free to reach out.\u003cbr\u003e\u003cbr\u003ePlease see further technical documentation describing installation and usage on \u003ca rel=\"noopener\" href=\"https:\/\/docs.serge.industries\/probe\/getting_started\/\" target=\"_blank\"\u003edocs.serge.industries\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIncluded in the kit is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStorage box\u003c\/li\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eSpare stylus\u003c\/li\u003e\n\u003cli\u003eAllen key for adjustment\u003c\/li\u003e\n\u003cli\u003eCard with effective probe tip diameter\u003c\/li\u003e\n\u003cli\u003eProbe itself\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Serge Industries","offers":[{"title":"Original Carvera","offer_id":53289876160696,"sku":null,"price":177.56,"currency_code":"AUD","in_stock":false},{"title":"Carvera Air","offer_id":53289876193464,"sku":null,"price":177.56,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/3821\/0232\/files\/il_fullxfull.7270951714_emer.jpg?v=1775959250"},{"product_id":"digital-product","title":"Spindle Tramming Tool Model","description":"\u003cp\u003eUse your own dial indicator to measure and correct the spindle tilt.\u003c\/p\u003e\n\u003cp\u003eUsing this tool you can rotate the dial indicator against the bed and it will show you how much the spindle is tilted, and in which direction. The distance between the spindle and Dial Indicator(s) is 95mm.\u003c\/p\u003e\n\u003cp\u003eBe sure that your bed is flat before using this tool. This is best achieved by replacing the stock MDF beds with an metal one, and using shims between the bed carriage and bed to level it out. You can use the ZProbe to measure the bed flatness see \u003ca href=\"https:\/\/carvera-community.gitbook.io\/docs\/guides\/measuring-bed-flatness\"\u003ethe guide\u003c\/a\u003e I wrote.\u003c\/p\u003e","brand":"Serge Industries","offers":[{"title":"Default Title","offer_id":53290020208824,"sku":null,"price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/3821\/0232\/files\/TrammingArm.png?v=1775967281"}],"url":"https:\/\/serge.industries\/collections\/measurement-tools.oembed","provider":"Serge Industries","version":"1.0","type":"link"}